From c1d8d13926a496f0989864996f00de393c95d781 Mon Sep 17 00:00:00 2001 From: Noa Aarts Date: Fri, 21 Nov 2025 11:53:37 +0100 Subject: [PATCH] redo init.lua to fix warnings etc --- common/nvim/init.lua | 1056 +++++++++++++++++++++++++----------------- 1 file changed, 623 insertions(+), 433 deletions(-) diff --git a/common/nvim/init.lua b/common/nvim/init.lua index 04b32e1..a99e695 100644 --- a/common/nvim/init.lua +++ b/common/nvim/init.lua @@ -1,85 +1,94 @@ -- Set as the leader key -- See `:help mapleader` -- NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used) -vim.g.mapleader = " " -vim.g.maplocalleader = " " +vim.g.mapleader = ' ' +vim.g.maplocalleader = ' ' + +-- Set to true if you have a Nerd Font installed and selected in the terminal +vim.g.have_nerd_font = false -- [[ Setting options ]] --- See `:help vim.opt` +-- See `:help vim.o` -- NOTE: You can change these options as you wish! - --- Set highlight on search -vim.o.hlsearch = true -- For more options, you can see `:help option-list` -- Make line numbers default -vim.opt.number = true --- You can also add relative line numbers, for help with jumping. +vim.o.number = true +-- You can also add relative line numbers, to help with jumping. -- Experiment for yourself to see if you like it! -vim.opt.relativenumber = true +vim.o.relativenumber = true -- Enable mouse mode, can be useful for resizing splits for example! -vim.opt.mouse = "a" +vim.o.mouse = 'a' --- Don't show the mode, since it's already in status line -vim.opt.showmode = false +-- Don't show the mode, since it's already in the status line +vim.o.showmode = false + +-- Sync clipboard between OS and Neovim. +-- Schedule the setting after `UiEnter` because it can increase startup-time. +-- Remove this option if you want your OS clipboard to remain independent. +-- See `:help 'clipboard'` +-- vim.schedule(function() +-- vim.o.clipboard = 'unnamedplus' +-- end) -- Enable break indent -vim.opt.breakindent = true +vim.o.breakindent = true -- Save undo history -vim.opt.undofile = true +vim.o.undofile = true --- Case-insensitive searching UNLESS \C or capital in search -vim.opt.ignorecase = true -vim.opt.smartcase = true +-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term +vim.o.ignorecase = true +vim.o.smartcase = true -- Keep signcolumn on by default -vim.opt.signcolumn = "yes" +vim.o.signcolumn = 'yes' -- Decrease update time -vim.opt.updatetime = 250 -vim.opt.timeoutlen = 300 +vim.o.updatetime = 250 + +-- Decrease mapped sequence wait time +vim.o.timeoutlen = 300 -- Configure how new splits should be opened -vim.opt.splitright = true -vim.opt.splitbelow = true +vim.o.splitright = true +vim.o.splitbelow = true --- Sets how neovim will display certain whitespace in the editor. --- See :help 'list' --- and :help 'listchars' -vim.opt.list = true -vim.opt.listchars = { tab = "» ", trail = "·", nbsp = "␣" } - --- make tabs a reasonable width -vim.opt.tabstop = 2 -vim.opt.softtabstop = 2 -vim.opt.shiftwidth = 2 +-- Sets how neovim will display certain whitespace characters in the editor. +-- See `:help 'list'` +-- and `:help 'listchars'` +-- +-- Notice listchars is set using `vim.opt` instead of `vim.o`. +-- It is very similar to `vim.o` but offers an interface for conveniently interacting with tables. +-- See `:help lua-options` +-- and `:help lua-options-guide` +vim.o.list = true +vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' } -- Preview substitutions live, as you type! -vim.opt.inccommand = "split" +vim.o.inccommand = 'split' -- Show which line your cursor is on -vim.opt.cursorline = true +vim.o.cursorline = true -- Minimal number of screen lines to keep above and below the cursor. -vim.opt.scrolloff = 10 +vim.o.scrolloff = 10 -vim.opt.foldmethod = "expr" -vim.opt.foldexpr = "nvim_treesitter#foldexpr()" +-- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`), +-- instead raise a dialog asking if you wish to save the current file(s) +-- See `:help 'confirm'` +vim.o.confirm = true -- [[ Basic Keymaps ]] -- See `:help vim.keymap.set()` --- Set highlight on search, but clear on pressing in normal mode -vim.opt.hlsearch = true -vim.keymap.set("n", "", "nohlsearch") +-- Clear highlights on search when pressing in normal mode +-- See `:help hlsearch` +vim.keymap.set('n', '', 'nohlsearch') -- Diagnostic keymaps -vim.keymap.set("n", "[d", vim.diagnostic.goto_prev, { desc = "Go to previous [D]iagnostic message" }) -vim.keymap.set("n", "]d", vim.diagnostic.goto_next, { desc = "Go to next [D]iagnostic message" }) -vim.keymap.set("n", "e", vim.diagnostic.open_float, { desc = "Show diagnostic [E]rror messages" }) -vim.keymap.set("n", "q", vim.diagnostic.setloclist, { desc = "Open diagnostic [Q]uickfix list" }) +vim.keymap.set('n', 'q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' }) -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier -- for people to discover. Otherwise, you normally need to press , which @@ -87,37 +96,31 @@ vim.keymap.set("n", "q", vim.diagnostic.setloclist, { desc = "Open diagn -- -- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping -- or just use to exit terminal mode -vim.keymap.set("t", "", "", { desc = "Exit terminal mode" }) +vim.keymap.set('t', '', '', { desc = 'Exit terminal mode' }) -vim.keymap.set("n", "", 'echo "Use h to move!!"') -vim.keymap.set("n", "", 'echo "Use l to move!!"') -vim.keymap.set("n", "", 'echo "Use k to move!!"') -vim.keymap.set("n", "", 'echo "Use j to move!!"') +-- TIP: Disable arrow keys in normal mode +vim.keymap.set('n', '', 'echo "Use h to move!!"') +vim.keymap.set('n', '', 'echo "Use l to move!!"') +vim.keymap.set('n', '', 'echo "Use k to move!!"') +vim.keymap.set('n', '', 'echo "Use j to move!!"') -- Keybinds to make split navigation easier. -- Use CTRL+ to switch between windows -- -- See `:help wincmd` for a list of all window commands -vim.keymap.set("n", "", "", { desc = "Move focus to the left window" }) -vim.keymap.set("n", "", "", { desc = "Move focus to the right window" }) -vim.keymap.set("n", "", "", { desc = "Move focus to the lower window" }) -vim.keymap.set("n", "", "", { desc = "Move focus to the upper window" }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the left window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the right window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the lower window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the upper window' }) --- Highlight when yanking (copying) text --- Try it with `yap` in normal mode --- See `:help vim.highlight.on_yank()` -vim.api.nvim_create_autocmd("TextYankPost", { - group = vim.api.nvim_create_augroup("kickstart-highlight-yank", { clear = true }), - callback = function() - vim.highlight.on_yank() - end, -}) +-- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes +-- vim.keymap.set("n", "", "H", { desc = "Move window to the left" }) +-- vim.keymap.set("n", "", "L", { desc = "Move window to the right" }) +-- vim.keymap.set("n", "", "J", { desc = "Move window to the lower" }) +-- vim.keymap.set("n", "", "K", { desc = "Move window to the upper" }) vim.keymap.set("n", "pv", vim.cmd.Ex) --- greatest remap ever -vim.keymap.set("x", "p", [["_dP]]) - --- next greatest remap ever : asbjornHaland +vim.keymap.set("x", "x", [["_dP]]) vim.keymap.set({ "n", "v" }, "y", [["+y]]) vim.keymap.set("n", "Y", [["+Y]]) @@ -126,21 +129,35 @@ vim.keymap.set({ "n", "v" }, "d", [["_d]]) vim.keymap.set("v", "J", ":m '>+1gv=gv") vim.keymap.set("v", "K", ":m '<-2gv=gv") --- need to add filetype for templ lsp to work -vim.filetype.add({ - extension = { - templ = "templ", - }, + +-- [[ Basic Autocommands ]] +-- See `:help lua-guide-autocommands` + +-- Highlight when yanking (copying) text +-- Try it with `yap` in normal mode +-- See `:help vim.hl.on_yank()` +vim.api.nvim_create_autocmd('TextYankPost', { + desc = 'Highlight when yanking (copying) text', + group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }), + callback = function() + vim.hl.on_yank() + end, }) -- [[ Install `lazy.nvim` plugin manager ]] -- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info -local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim" -if not vim.loop.fs_stat(lazypath) then - local lazyrepo = "https://github.com/folke/lazy.nvim.git" - vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath }) -end ---@diagnostic disable-next-line: undefined-field -vim.opt.rtp:prepend(lazypath) +local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' +if not (vim.uv or vim.loop).fs_stat(lazypath) then + local lazyrepo = 'https://github.com/folke/lazy.nvim.git' + local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } + if vim.v.shell_error ~= 0 then + error('Error cloning lazy.nvim:\n' .. out) + end +end + +---@type vim.Option +local rtp = vim.opt.rtp +rtp:prepend(lazypath) -- [[ Configure and install plugins ]] -- @@ -149,75 +166,115 @@ vim.opt.rtp:prepend(lazypath) -- -- You can press `?` in this menu for help. Use `:q` to close the window -- --- To update plugins, you can run +-- To update plugins you can run -- :Lazy update -- -- NOTE: Here is where you install your plugins. -require("lazy").setup({ - - "tpope/vim-fugitive", - +require('lazy').setup({ -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link). - "tpope/vim-sleuth", -- Detect tabstop and shiftwidth automatically + 'NMAC427/guess-indent.nvim', -- Detect tabstop and shiftwidth automatically + 'tpope/vim-fugitive', -- git thing + 'norcalli/nvim-colorizer.lua', -- highlight colors and rgb codes -- NOTE: Plugins can also be added by using a table, -- with the first argument being the link and the following -- keys can be used to configure plugin behavior/loading/etc. -- - -- Use `opts = {}` to force a plugin to be loaded. + -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded. -- - -- This is equivalent to: - -- require('Comment').setup({}) - - -- makes nice colors - "norcalli/nvim-colorizer.lua", - - -- "gc" to comment visual regions/lines - { "numToStr/Comment.nvim", opts = {} }, + -- Alternatively, use `config = function() ... end` for full control over the configuration. + -- If you prefer to call `setup` explicitly, use: + -- { + -- 'lewis6991/gitsigns.nvim', + -- config = function() + -- require('gitsigns').setup({ + -- -- Your gitsigns configuration here + -- }) + -- end, + -- } + -- -- Here is a more advanced example where we pass configuration - -- options to `gitsigns.nvim`. This is equivalent to the following lua: - -- require('gitsigns').setup({ ... }) + -- options to `gitsigns.nvim`. -- -- See `:help gitsigns` to understand what the configuration keys do { -- Adds git related signs to the gutter, as well as utilities for managing changes - "lewis6991/gitsigns.nvim", + 'lewis6991/gitsigns.nvim', opts = { signs = { - add = { text = "+" }, - change = { text = "~" }, - delete = { text = "_" }, - topdelete = { text = "‾" }, - changedelete = { text = "~" }, + add = { text = '+' }, + change = { text = '~' }, + delete = { text = '_' }, + topdelete = { text = '‾' }, + changedelete = { text = '~' }, }, }, }, - -- NOTE: Plugins can also be configured to run lua code when they are loaded. + -- NOTE: Plugins can also be configured to run Lua code when they are loaded. -- -- This is often very useful to both group configuration, as well as handle -- lazy loading plugins that don't need to be loaded immediately at startup. -- -- For example, in the following configuration, we use: - -- event = 'VeryLazy' + -- event = 'VimEnter' -- - -- which loads which-key after all the UI elements are loaded. Events can be - -- normal autocommands events (:help autocomd-events). + -- which loads which-key before all the UI elements are loaded. Events can be + -- normal autocommands events (`:help autocmd-events`). -- - -- Then, because we use the `config` key, the configuration only runs - -- after the plugin has been loaded: - -- config = function() ... end + -- Then, because we use the `opts` key (recommended), the configuration runs + -- after the plugin has been loaded as `require(MODULE).setup(opts)`. { -- Useful plugin to show you pending keybinds. - "folke/which-key.nvim", - event = "VeryLazy", -- Sets the loading event to 'VeryLazy' - opts = {}, - keys = { - { "c", name = "[C]ode" }, - { "d", name = "[D]ocument" }, - { "r", name = "[R]ename" }, - { "s", name = "[S]earch" }, - { "w", name = "[W]orkspace" }, + 'folke/which-key.nvim', + event = 'VimEnter', -- Sets the loading event to 'VimEnter' + opts = { + -- delay between pressing a key and opening which-key (milliseconds) + -- this setting is independent of vim.o.timeoutlen + delay = 0, + icons = { + -- set icon mappings to true if you have a Nerd Font + mappings = vim.g.have_nerd_font, + -- If you are using a Nerd Font: set icons.keys to an empty table which will use the + -- default which-key.nvim defined Nerd Font icons, otherwise define a string table + keys = vim.g.have_nerd_font and {} or { + Up = ' ', + Down = ' ', + Left = ' ', + Right = ' ', + C = ' ', + M = ' ', + D = ' ', + S = ' ', + CR = ' ', + Esc = ' ', + ScrollWheelDown = ' ', + ScrollWheelUp = ' ', + NL = ' ', + BS = ' ', + Space = ' ', + Tab = ' ', + F1 = '', + F2 = '', + F3 = '', + F4 = '', + F5 = '', + F6 = '', + F7 = '', + F8 = '', + F9 = '', + F10 = '', + F11 = '', + F12 = '', + }, + }, + + -- Document existing key chains + spec = { + { 's', group = '[S]earch' }, + { 't', group = '[T]oggle' }, + { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, + }, }, }, @@ -229,54 +286,51 @@ require("lazy").setup({ -- Use the `dependencies` key to specify the dependencies of a particular plugin { -- Fuzzy Finder (files, lsp, etc) - "nvim-telescope/telescope.nvim", - event = "VeryLazy", - branch = "0.1.x", + 'nvim-telescope/telescope.nvim', + event = 'VimEnter', dependencies = { - "nvim-lua/plenary.nvim", - { -- If encountering errors, see telescope-fzf-native README for install instructions - "nvim-telescope/telescope-fzf-native.nvim", + 'nvim-lua/plenary.nvim', + { -- If encountering errors, see telescope-fzf-native README for installation instructions + 'nvim-telescope/telescope-fzf-native.nvim', -- `build` is used to run some command when the plugin is installed/updated. -- This is only run then, not every time Neovim starts up. - build = "make", + build = 'make', -- `cond` is a condition used to determine whether this plugin should be -- installed and loaded. cond = function() - return vim.fn.executable("make") == 1 + return vim.fn.executable 'make' == 1 end, }, - { "nvim-telescope/telescope-ui-select.nvim" }, + { 'nvim-telescope/telescope-ui-select.nvim' }, - -- Useful for getting pretty icons, but requires special font. - -- If you already have a Nerd Font, or terminal set up with fallback fonts - -- you can enable this - -- { 'nvim-tree/nvim-web-devicons' } + -- Useful for getting pretty icons, but requires a Nerd Font. + { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, }, config = function() -- Telescope is a fuzzy finder that comes with a lot of different things that -- it can fuzzy find! It's more than just a "file finder", it can search -- many different aspects of Neovim, your workspace, LSP, and more! -- - -- The easiest way to use telescope, is to start by doing something like: + -- The easiest way to use Telescope, is to start by doing something like: -- :Telescope help_tags -- -- After running this command, a window will open up and you're able to - -- type in the prompt window. You'll see a list of help_tags options and + -- type in the prompt window. You'll see a list of `help_tags` options and -- a corresponding preview of the help. -- - -- Two important keymaps to use while in telescope are: + -- Two important keymaps to use while in Telescope are: -- - Insert mode: -- - Normal mode: ? -- -- This opens a window that shows you all of the keymaps for the current - -- telescope picker. This is really useful to discover what Telescope can + -- Telescope picker. This is really useful to discover what Telescope can -- do as well as how to actually do it! -- [[ Configure Telescope ]] -- See `:help telescope` and `:help telescope.setup()` - require("telescope").setup({ + require('telescope').setup { -- You can put your default mappings / updates / etc. in here -- All the info you're looking for is in `:help telescope.setup()` -- @@ -287,131 +341,177 @@ require("lazy").setup({ -- }, -- pickers = {} extensions = { - ["ui-select"] = { - require("telescope.themes").get_dropdown(), + ['ui-select'] = { + require('telescope.themes').get_dropdown(), }, }, - }) + } - -- Enable telescope extensions, if they are installed - pcall(require("telescope").load_extension, "fzf") - pcall(require("telescope").load_extension, "ui-select") + -- Enable Telescope extensions if they are installed + pcall(require('telescope').load_extension, 'fzf') + pcall(require('telescope').load_extension, 'ui-select') -- See `:help telescope.builtin` - local builtin = require("telescope.builtin") - vim.keymap.set("n", "sh", builtin.help_tags, { desc = "[S]earch [H]elp" }) - vim.keymap.set("n", "sk", builtin.keymaps, { desc = "[S]earch [K]eymaps" }) - vim.keymap.set("n", "sf", builtin.find_files, { desc = "[S]earch [F]iles" }) - vim.keymap.set("n", "ss", builtin.builtin, { desc = "[S]earch [S]elect Telescope" }) - vim.keymap.set("n", "sw", builtin.grep_string, { desc = "[S]earch current [W]ord" }) - vim.keymap.set("n", "sg", builtin.live_grep, { desc = "[S]earch by [G]rep" }) - vim.keymap.set("n", "sd", builtin.diagnostics, { desc = "[S]earch [D]iagnostics" }) - vim.keymap.set("n", "sr", builtin.resume, { desc = "[S]earch [R]esume" }) - vim.keymap.set("n", "s.", builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) - vim.keymap.set("n", "", builtin.buffers, { desc = "[ ] Find existing buffers" }) + local builtin = require 'telescope.builtin' + vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) + vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) + vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) + vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) + vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) + vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) + vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) + vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) + vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) + vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) -- Slightly advanced example of overriding default behavior and theme - vim.keymap.set("n", "/", function() - -- You can pass additional configuration to telescope to change theme, layout, etc. - builtin.current_buffer_fuzzy_find(require("telescope.themes").get_dropdown({ + vim.keymap.set('n', '/', function() + -- You can pass additional configuration to Telescope to change the theme, layout, etc. + builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { winblend = 10, previewer = false, - })) - end, { desc = "[/] Fuzzily search in current buffer" }) - - -- Also possible to pass additional configuration options. - -- See `:help telescope.builtin.live_grep()` for information about particular keys - vim.keymap.set("n", "s/", function() - builtin.live_grep({ - grep_open_files = true, - prompt_title = "Live Grep in Open Files", }) - end, { desc = "[S]earch [/] in Open Files" }) + end, { desc = '[/] Fuzzily search in current buffer' }) - -- Shortcut for searching your neovim configuration files - vim.keymap.set("n", "sn", function() - builtin.find_files({ cwd = vim.fn.stdpath("config") }) - end, { desc = "[S]earch [N]eovim files" }) + -- It's also possible to pass additional configuration options. + -- See `:help telescope.builtin.live_grep()` for information about particular keys + vim.keymap.set('n', 's/', function() + builtin.live_grep { + grep_open_files = true, + prompt_title = 'Live Grep in Open Files', + } + end, { desc = '[S]earch [/] in Open Files' }) + + -- Shortcut for searching your Neovim configuration files + vim.keymap.set('n', 'sn', function() + builtin.find_files { cwd = vim.fn.stdpath 'config' } + end, { desc = '[S]earch [N]eovim files' }) end, }, + -- LSP Plugins { - "dundalek/lazy-lsp.nvim", + -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins + -- used for completion, annotations and signatures of Neovim apis + 'folke/lazydev.nvim', + ft = 'lua', + opts = { + library = { + -- Load luvit types when the `vim.uv` word is found + { path = '${3rd}/luv/library', words = { 'vim%.uv' } }, + }, + }, + }, + { + -- Main LSP Configuration + 'neovim/nvim-lspconfig', dependencies = { - "neovim/nvim-lspconfig", - { "VonHeikemen/lsp-zero.nvim", branch = "v3.x" }, - "hrsh7th/cmp-nvim-lsp", - "hrsh7th/nvim-cmp", + { 'VonHeikemen/lsp-zero.nvim', opts = {} }, + { + 'dundalek/lazy-lsp.nvim', + opts = { + use_vim_lsp_config = true, + } + }, + + -- Useful status updates for LSP. + { 'j-hui/fidget.nvim', opts = {} }, + + -- Allows extra capabilities provided by blink.cmp + 'saghen/blink.cmp', }, config = function() - local lsp_zero = require("lsp-zero") - require("neodev").setup() - require("colorizer").setup() + -- Brief aside: **What is LSP?** + -- + -- LSP is an initialism you've probably heard, but might not understand what it is. + -- + -- LSP stands for Language Server Protocol. It's a protocol that helps editors + -- and language tooling communicate in a standardized fashion. + -- + -- In general, you have a "server" which is some tool built to understand a particular + -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers + -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone + -- processes that communicate with some "client" - in this case, Neovim! + -- + -- LSP provides Neovim with features like: + -- - Go to definition + -- - Find references + -- - Autocompletion + -- - Symbol Search + -- - and more! + -- + -- Thus, Language Servers are external tools that must be installed separately from + -- Neovim. This is where `mason` and related plugins come into play. + -- + -- If you're wondering about lsp vs treesitter, you can check out the wonderfully + -- and elegantly composed help section, `:help lsp-vs-treesitter` - lsp_zero.on_attach(function(client, bufnr) - lsp_zero.default_keymaps({ - buffer = bufnr, - preserve_mappings = false, - }) - end) - - vim.api.nvim_create_autocmd("LspAttach", { - group = vim.api.nvim_create_augroup("kickstart-lsp-attach", { clear = true }), + -- This function gets run when an LSP attaches to a particular buffer. + -- That is to say, every time a new file is opened that is associated with + -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this + -- function will be executed to configure the current buffer + vim.api.nvim_create_autocmd('LspAttach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }), callback = function(event) - -- NOTE: Remember that lua is a real programming language, and as such it is possible - -- to define small helper and utility functions so you don't have to repeat yourself - -- many times. + -- NOTE: Remember that Lua is a real programming language, and as such it is possible + -- to define small helper and utility functions so you don't have to repeat yourself. -- -- In this case, we create a function that lets us more easily define mappings specific -- for LSP related items. It sets the mode, buffer and description for us each time. - local map = function(keys, func, desc) - vim.keymap.set("n", keys, func, { buffer = event.buf, desc = "LSP: " .. desc }) + local map = function(keys, func, desc, mode) + mode = mode or 'n' + vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc }) end - -- Jump to the definition of the word under your cursor. - -- This is where a variable was first declared, or where a function is defined, etc. - -- To jump back, press . - map("gd", require("telescope.builtin").lsp_definitions, "[G]oto [D]efinition") + -- Rename the variable under your cursor. + -- Most Language Servers support renaming across files, etc. + map('grn', vim.lsp.buf.rename, '[R]e[n]ame') + + -- Execute a code action, usually your cursor needs to be on top of an error + -- or a suggestion from your LSP for this to activate. + map('gra', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' }) -- Find references for the word under your cursor. - map("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences") + map('grr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences') -- Jump to the implementation of the word under your cursor. -- Useful when your language has ways of declaring types without an actual implementation. - map("gI", require("telescope.builtin").lsp_implementations, "[G]oto [I]mplementation") + map('gri', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation') + + -- Jump to the definition of the word under your cursor. + -- This is where a variable was first declared, or where a function is defined, etc. + -- To jump back, press . + map('grd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition') + + -- WARN: This is not Goto Definition, this is Goto Declaration. + -- For example, in C this would take you to the header. + map('grD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') + + -- Fuzzy find all the symbols in your current document. + -- Symbols are things like variables, functions, types, etc. + map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols') + + -- Fuzzy find all the symbols in your current workspace. + -- Similar to document symbols, except searches over your entire project. + map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols') -- Jump to the type of the word under your cursor. -- Useful when you're not sure what type a variable is and you want to see -- the definition of its *type*, not where it was *defined*. - map("D", require("telescope.builtin").lsp_type_definitions, "Type [D]efinition") + map('grt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition') - -- Fuzzy find all the symbols in your current document. - -- Symbols are things like variables, functions, types, etc. - map("ds", require("telescope.builtin").lsp_document_symbols, "[D]ocument [S]ymbols") - - -- Fuzzy find all the symbols in your current workspace - -- Similar to document symbols, except searches over your whole project. - map( - "ws", - require("telescope.builtin").lsp_dynamic_workspace_symbols, - "[W]orkspace [S]ymbols" - ) - - -- Rename the variable under your cursor - -- Most Language Servers support renaming across files, etc. - map("rn", vim.lsp.buf.rename, "[R]e[n]ame") - - -- Execute a code action, usually your cursor needs to be on top of an error - -- or a suggestion from your LSP for this to activate. - map("ca", vim.lsp.buf.code_action, "[C]ode [A]ction") - - -- Opens a popup that displays documentation about the word under your cursor - -- See `:help K` for why this keymap - map("K", vim.lsp.buf.hover, "Hover Documentation") - - -- WARN: This is not Goto Definition, this is Goto Declaration. - -- For example, in C this would take you to the header - map("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration") + -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10) + ---@param client vim.lsp.Client + ---@param method vim.lsp.protocol.Method + ---@param bufnr? integer some lsp support methods only in specific files + ---@return boolean + local function client_supports_method(client, method, bufnr) + if vim.fn.has 'nvim-0.11' == 1 then + return client:supports_method(method, bufnr) + else + return client.supports_method(method, { bufnr = bufnr }) + end + end -- The following two autocommands are used to highlight references of the -- word under your cursor when your cursor rests there for a little while. @@ -419,307 +519,397 @@ require("lazy").setup({ -- -- When you move your cursor, the highlights will be cleared (the second autocommand). local client = vim.lsp.get_client_by_id(event.data.client_id) - if client and client.server_capabilities.documentHighlightProvider then - vim.api.nvim_create_autocmd({ "CursorHold", "CursorHoldI" }, { + if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then + local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) + vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { buffer = event.buf, + group = highlight_augroup, callback = vim.lsp.buf.document_highlight, }) - vim.api.nvim_create_autocmd({ "CursorMoved", "CursorMovedI" }, { + vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, { buffer = event.buf, + group = highlight_augroup, callback = vim.lsp.buf.clear_references, }) + + vim.api.nvim_create_autocmd('LspDetach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }), + callback = function(event2) + vim.lsp.buf.clear_references() + vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf } + end, + }) + end + + -- The following code creates a keymap to toggle inlay hints in your + -- code, if the language server you are using supports them + -- + -- This may be unwanted, since they displace some of your code + if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then + map('th', function() + vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) + end, '[T]oggle Inlay [H]ints') end end, }) - require("lazy-lsp").setup({ - excluded_servers = { - "nixd", -- is being a buggy cpu hog or something - "pylyzer", -- no, you don't get my ram + -- Diagnostic Config + -- See :help vim.diagnostic.Opts + vim.diagnostic.config { + severity_sort = true, + float = { border = 'rounded', source = 'if_many' }, + underline = { severity = vim.diagnostic.severity.ERROR }, + signs = vim.g.have_nerd_font and { + text = { + [vim.diagnostic.severity.ERROR] = '󰅚 ', + [vim.diagnostic.severity.WARN] = '󰀪 ', + [vim.diagnostic.severity.INFO] = '󰋽 ', + [vim.diagnostic.severity.HINT] = '󰌶 ', + }, + } or {}, + virtual_text = { + source = 'if_many', + spacing = 2, + format = function(diagnostic) + local diagnostic_message = { + [vim.diagnostic.severity.ERROR] = diagnostic.message, + [vim.diagnostic.severity.WARN] = diagnostic.message, + [vim.diagnostic.severity.INFO] = diagnostic.message, + [vim.diagnostic.severity.HINT] = diagnostic.message, + } + return diagnostic_message[diagnostic.severity] + end, }, - configs = { - nixd = { - settings = { - nixd = { - options = { - nixos = { - expr = "(builtins.getFlake \"/home/noa/programming/nixconf/\").nixosConfigurations.lambdaOS.options", - }, - home_manager = { - expr = - "(builtins.getFlake \"/home/noa/programming/nixconf/\").homeConfigurations.\"noa@lambdaOS\".options", - }, - }, - formatting = { - command = { "nixfmt" } - }, - }, - }, - }, - nil_ls = { - settings = { - ['nil'] = { - formatting = { - command = { "nixfmt" } - }, - }, - }, - }, - rust_analyzer = { - settings = { - ['rust-analyzer'] = { - diagnostics = { - styleLints = { - enable = true, - }, - }, - }, - }, - }, - lua_ls = { - settings = { - Lua = { - diagnostics = { - global = { "vim" }, - }, + } + + -- LSP servers and clients are able to communicate to each other what features they support. + -- By default, Neovim doesn't support everything that is in the LSP specification. + -- When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities. + -- So, we create new capabilities with blink.cmp, and then broadcast that to the servers. + local capabilities = require('blink.cmp').get_lsp_capabilities() + + -- Enable the following language servers + -- Feel free to add/remove any LSPs that you want here. They will automatically be installed. + -- + -- Add any additional override configuration in the following tables. Available keys are: + -- - cmd (table): Override the default command used to start the server + -- - filetypes (table): Override the default list of associated filetypes for the server + -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features. + -- - settings (table): Override the default settings passed when initializing the server. + -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/ + local servers = { + -- clangd = {}, + -- gopls = {}, + -- pyright = {}, + -- rust_analyzer = {}, + -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs + -- + -- Some languages (like typescript) have entire language plugins that can be useful: + -- https://github.com/pmizio/typescript-tools.nvim + -- + -- But for many setups, the LSP (`ts_ls`) will work just fine + -- ts_ls = {}, + -- + + lua_ls = { + -- cmd = { ... }, + -- filetypes = { ... }, + -- capabilities = {}, + settings = { + Lua = { + completion = { + callSnippet = 'Replace', }, + -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings + -- diagnostics = { disable = { 'missing-fields' } }, }, }, }, + } + + local ensure_installed = vim.tbl_keys(servers or {}) + vim.list_extend(ensure_installed, { + 'stylua', -- Used to format Lua code }) end, }, - { - 'chomosuke/typst-preview.nvim', - opts = { - open_cmd = 'firefox %s', - port = 28282, - }, - ft = 'typst', - branch = "master", - build = function() require 'typst-preview'.update() end, - }, - { "folke/neodev.nvim", opts = {} }, { -- Autoformat - "stevearc/conform.nvim", + 'stevearc/conform.nvim', + event = { 'BufWritePre' }, + cmd = { 'ConformInfo' }, + keys = { + { + 'f', + function() + require('conform').format { async = true, lsp_format = 'fallback' } + end, + mode = '', + desc = '[F]ormat buffer', + }, + }, opts = { notify_on_error = false, - format_on_save = { - timeout_ms = 500, - lsp_format = "fallback", - }, + format_on_save = function(bufnr) + -- Disable "format_on_save lsp_fallback" for languages that don't + -- have a well standardized coding style. You can add additional + -- languages here or re-enable it for the disabled ones. + local disable_filetypes = { c = true, cpp = true } + if disable_filetypes[vim.bo[bufnr].filetype] then + return nil + else + return { + timeout_ms = 500, + lsp_format = 'fallback', + } + end + end, formatters_by_ft = { - lua = { "stylua" }, + lua = { 'stylua' }, -- Conform can also run multiple formatters sequentially - python = { "black", "pyright" }, - - go = { "gofmt" }, - - haskell = { "fourmolu" }, + -- python = { "isort", "black" }, -- - -- You can use a sub-list to tell conform to run *until* a formatter - -- is found. - -- javascript = { { "prettierd", "prettier" } }, + -- You can use 'stop_after_first' to run the first available formatter from the list + -- javascript = { "prettierd", "prettier", stop_after_first = true }, }, }, }, { -- Autocompletion - "hrsh7th/nvim-cmp", - event = "InsertEnter", + 'saghen/blink.cmp', + event = 'VimEnter', + version = '1.*', dependencies = { - -- Snippet Engine & its associated nvim-cmp source + -- Snippet Engine { - "L3MON4D3/LuaSnip", + 'L3MON4D3/LuaSnip', + version = '2.*', build = (function() - -- Build Step is needed for regex support in snippets - -- This step is not supported in many windows environments - -- Remove the below condition to re-enable on windows - if vim.fn.has("win32") == 1 or vim.fn.executable("make") == 0 then + -- Build Step is needed for regex support in snippets. + -- This step is not supported in many windows environments. + -- Remove the below condition to re-enable on windows. + if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then return end - return "make install_jsregexp" + return 'make install_jsregexp' end)(), - }, - "saadparwaiz1/cmp_luasnip", - - -- Adds other completion capabilities. - -- nvim-cmp does not ship with all sources by default. They are split - -- into multiple repos for maintenance purposes. - "hrsh7th/cmp-nvim-lsp", - "hrsh7th/cmp-path", - - -- If you want to add a bunch of pre-configured snippets, - -- you can use this plugin to help you. It even has snippets - -- for various frameworks/libraries/etc. but you will have to - -- set up the ones that are useful for you. - "rafamadriz/friendly-snippets", - }, - config = function() -- See `:help cmp` - local cmp = require("cmp") - local luasnip = require("luasnip") - luasnip.config.setup({}) - - require("luasnip.loaders.from_vscode").lazy_load() - cmp.setup({ - snippet = { - expand = function(args) - luasnip.lsp_expand(args.body) - end, + dependencies = { + -- `friendly-snippets` contains a variety of premade snippets. + -- See the README about individual language/framework/plugin snippets: + -- https://github.com/rafamadriz/friendly-snippets + -- { + -- 'rafamadriz/friendly-snippets', + -- config = function() + -- require('luasnip.loaders.from_vscode').lazy_load() + -- end, + -- }, }, - completion = { completeopt = "menu,menuone,noinsert" }, - - -- For an understanding of why these mappings were - -- chosen, you will need to read `:help ins-completion` + opts = {}, + }, + 'folke/lazydev.nvim', + }, + --- @module 'blink.cmp' + --- @type blink.cmp.Config + opts = { + keymap = { + -- 'default' (recommended) for mappings similar to built-in completions + -- to accept ([y]es) the completion. + -- This will auto-import if your LSP supports it. + -- This will expand snippets if the LSP sent a snippet. + -- 'super-tab' for tab to accept + -- 'enter' for enter to accept + -- 'none' for no mappings + -- + -- For an understanding of why the 'default' preset is recommended, + -- you will need to read `:help ins-completion` -- -- No, but seriously. Please read `:help ins-completion`, it is really good! - mapping = cmp.mapping.preset.insert({ - -- Select the [n]ext item - [""] = cmp.mapping.select_next_item(), - -- Select the [p]revious item - [""] = cmp.mapping.select_prev_item(), + -- + -- All presets have the following mappings: + -- /: move to right/left of your snippet expansion + -- : Open menu or open docs if already open + -- / or /: Select next/previous item + -- : Hide menu + -- : Toggle signature help + -- + -- See :h blink-cmp-config-keymap for defining your own keymap + preset = 'default', - -- Accept ([y]es) the completion. - -- This will auto-import if your LSP supports it. - -- This will expand snippets if the LSP sent a snippet. - [""] = cmp.mapping.confirm({ cmp.ConfirmBehavior.Replace, select = true }), + -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: + -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps + }, - -- Manually trigger a completion from nvim-cmp. - -- Generally you don't need this, because nvim-cmp will display - -- completions whenever it has completion options available. - [""] = cmp.mapping.complete({}), + appearance = { + -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font' + -- Adjusts spacing to ensure icons are aligned + nerd_font_variant = 'mono', + }, - -- Think of as moving to the right of your snippet expansion. - -- So if you have a snippet that's like: - -- function $name($args) - -- $body - -- end - -- - -- will move you to the right of each of the expansion locations. - -- is similar, except moving you backwards. - [""] = cmp.mapping(function() - if luasnip.expand_or_locally_jumpable() then - luasnip.expand_or_jump() - end - end, { "i", "s" }), - [""] = cmp.mapping(function() - if luasnip.locally_jumpable(-1) then - luasnip.jump(-1) - end - end, { "i", "s" }), - }), - sources = { - { name = "nvim_lsp" }, - { name = "luasnip" }, - { name = "path" }, + completion = { + -- By default, you may press `` to show the documentation. + -- Optionally, set `auto_show = true` to show the documentation after a delay. + documentation = { auto_show = false, auto_show_delay_ms = 500 }, + }, + + sources = { + default = { 'lsp', 'path', 'snippets', 'lazydev' }, + providers = { + lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 }, }, - }) - end, + }, + + snippets = { preset = 'luasnip' }, + + -- Blink.cmp includes an optional, recommended rust fuzzy matcher, + -- which automatically downloads a prebuilt binary when enabled. + -- + -- By default, we use the Lua implementation instead, but you may enable + -- the rust implementation via `'prefer_rust_with_warning'` + -- + -- See :h blink-cmp-config-fuzzy for more information + fuzzy = { implementation = 'lua' }, + + -- Shows a signature help window while you type arguments for a function + signature = { enabled = true }, + }, }, { -- You can easily change to a different colorscheme. -- Change the name of the colorscheme plugin below, and then - -- change the command in the config to whatever the name of that colorscheme is + -- change the command in the config to whatever the name of that colorscheme is. -- - -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme` - "folke/tokyonight.nvim", - lazy = false, -- make sure we load this during startup if it is your main colorscheme - priority = 1000, -- make sure to load this before all the other start plugins + -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. + 'folke/tokyonight.nvim', + priority = 1000, -- Make sure to load this before all the other start plugins. config = function() - -- Load the colorscheme here - vim.cmd.colorscheme("tokyonight-night") + ---@diagnostic disable-next-line: missing-fields + require('tokyonight').setup { + styles = { + comments = { italic = false }, -- Disable italics in comments + }, + } - -- You can configure highlights by doing something like - vim.cmd.hi("Comment gui=none") + -- Load the colorscheme here. + -- Like many other themes, this one has different styles, and you could load + -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. + vim.cmd.colorscheme 'tokyonight-night' end, }, -- Highlight todo, notes, etc in comments - { "folke/todo-comments.nvim", dependencies = { "nvim-lua/plenary.nvim" }, opts = { signs = false } }, - - { "kenn7/vim-arsync", requires = { "prabirshrestha/async.vim" } }, - - { - "nvim-tree/nvim-web-devicons", - }, + { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } }, { -- Collection of various small independent plugins/modules - "echasnovski/mini.nvim", + 'echasnovski/mini.nvim', config = function() -- Better Around/Inside textobjects -- -- Examples: - -- - va) - [V]isually select [A]round [)]parenthen - -- - yinq - [Y]ank [I]nside [N]ext [']quote + -- - va) - [V]isually select [A]round [)]paren + -- - yinq - [Y]ank [I]nside [N]ext [Q]uote -- - ci' - [C]hange [I]nside [']quote - require("mini.ai").setup({ n_lines = 500 }) + require('mini.ai').setup { n_lines = 500 } -- Add/delete/replace surroundings (brackets, quotes, etc.) -- -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren -- - sd' - [S]urround [D]elete [']quotes -- - sr)' - [S]urround [R]eplace [)] ['] - require("mini.surround").setup() + require('mini.surround').setup() -- Simple and easy statusline. -- You could remove this setup call if you don't like it, -- and try some other statusline plugin - require("mini.statusline").setup() + local statusline = require 'mini.statusline' + -- set use_icons to true if you have a Nerd Font + statusline.setup { use_icons = vim.g.have_nerd_font } + + -- You can configure sections in the statusline by overriding their + -- default behavior. For example, here we set the section for + -- cursor location to LINE:COLUMN + ---@diagnostic disable-next-line: duplicate-set-field + statusline.section_location = function() + return '%2l:%-2v' + end -- ... and there is more! -- Check out: https://github.com/echasnovski/mini.nvim end, }, - { -- Highlight, edit, and navigate code - "nvim-treesitter/nvim-treesitter", - build = ":TSUpdate", - config = function() - -- [[ Configure Treesitter ]] See `:help nvim-treesitter` - - ---@diagnostic disable-next-line: missing-fields - require("nvim-treesitter.configs").setup({ - ensure_installed = { "lua" }, - -- Autoinstall languages that are not installed. Defaults to false (but you can change for yourself!) - auto_install = true, - highlight = { enable = true }, - indent = { enable = true }, - }) - - -- There are additional nvim-treesitter modules that you can use to interact - -- with nvim-treesitter. You should go explore a few and see what interests you: - -- - -- - Incremental selection: Included, see :help nvim-treesitter-incremental-selection-mod - -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context - -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects - end, + 'nvim-treesitter/nvim-treesitter', + build = ':TSUpdate', + main = 'nvim-treesitter.configs', -- Sets main module to use for opts + -- [[ Configure Treesitter ]] See `:help nvim-treesitter` + opts = { + ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' }, + -- Autoinstall languages that are not installed + auto_install = true, + highlight = { + enable = true, + -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules. + -- If you are experiencing weird indenting issues, add the language to + -- the list of additional_vim_regex_highlighting and disabled languages for indent. + additional_vim_regex_highlighting = { 'ruby' }, + }, + indent = { enable = true, disable = { 'ruby' } }, + }, + -- There are additional nvim-treesitter modules that you can use to interact + -- with nvim-treesitter. You should go explore a few and see what interests you: + -- + -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` + -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context + -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects }, - { - "nvim-treesitter/nvim-treesitter-context", - opts = { enable = true }, - }, - - -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the + -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the -- init.lua. If you want these files, they are in the repository, so you can just download them and - -- put them in the right spots if you want. + -- place them in the correct locations. - -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for kickstart + -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart -- - -- Here are some example plugins that I've included in the kickstart repository. + -- Here are some example plugins that I've included in the Kickstart repository. -- Uncomment any of the lines below to enable them (you will need to restart nvim). -- -- require 'kickstart.plugins.debug', -- require 'kickstart.plugins.indent_line', + -- require 'kickstart.plugins.lint', + -- require 'kickstart.plugins.autopairs', + -- require 'kickstart.plugins.neo-tree', + -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua` -- This is the easiest way to modularize your config. -- -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going. - -- For additional information see: :help lazy.nvim-lazy.nvim-structuring-your-plugins -- { import = 'custom.plugins' }, -}, {}) + -- + -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec` + -- Or use telescope! + -- In normal mode type `sh` then write `lazy.nvim-plugin` + -- you can continue same window with `sr` which resumes last telescope search +}, { + ui = { + -- If you are using a Nerd Font: set icons to an empty table which will use the + -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table + icons = vim.g.have_nerd_font and {} or { + cmd = '⌘', + config = '🛠', + event = '📅', + ft = '📂', + init = '⚙', + keys = '🗝', + plugin = '🔌', + runtime = '💻', + require = '🌙', + source = '📄', + start = '🚀', + task = '📌', + lazy = '💤 ', + }, + }, +}) + -- The line beneath this is called `modeline`. See `:help modeline` -- vim: ts=2 sts=2 sw=2 et